Wilckens' latex paint flat is the perfect support for your renovation work. The German Brand product is available in 5 liters. Due to its excellent material characteristics it make your walls indoor as well as outdoor more hardwearing and weather resistant. Futhermore, the latex paint is well covering, low-odour and has a flat gloss effect.
Application technology: The substrate must be clean, dry, grease-free and load-bearing. Loose parts of paintwork and chalking old paintwork must be removed and washed substrates must be solidified with Deep Primer LF. New plaster or concrete substrates must also be primed with Deep Primer LF.
1. Paint build-up on plaster and concrete, inside and outside
a) Prepare the substrate accordingly
b) Prime or solidify critical substrates accordingly
c) 1 x precoat with latex paint 15 % water diluted
d) Apply 1 - 2 x undiluted
2. Paint build-up on old paint coats or renovation paint coats
a) Substrate correspond to the preparatory work
b) Prime or solidify critical substrates accordingly
c) 1 -2 top coats undiluted
Danger/Caution: The usual protective measures must also be observed when processing low-pollutant paints - must not be allowed to fall into the hands of children - If medical advice is required, have packaging or identification label ready. Do not inhale spray and spray mist - Use combi-filter A2/P2 for spraying work, use dust filter P2 for grinding work - Ensure good ventilation during application and drying - In case of contact with eyes or skin, rinse immediately with plenty of water - Do not allow to enter drains, water or soil - Eat Avoid drinking and smoking while using the paint - wear suitable protective clothing, gloves and goggles when working with the paint - do not process at temperatures below + 5°C - only empty containers should be sent for recycling, dried material residues can be disposed of as household waste, liquid material residues should be handed in at the collection point for old paints
