Name: Wilckens mold protection paint highly opaque white 2.5 L
Brand: Wilckens
SKU: 13440015080
Price: 14.25 EUR
Availability: InStock

Wilckens mold protection paint highly opaque white 2.5 L

Item number: 13440015080
Manufacturer: Wilckens Farben GmbH

€14.25

(Base price: €5.70/liter) incl. tax + shipping**

(ready for shipping 1-3 working days)

Emulsion paint 2.5 L with fungicidal active ingredient from Wilckens

➤Use biocidal products carefully. Always read the label and product information before use.

The ready-to-use emulsion paint is very economical and contains mold protection for indoor damp rooms. It is capable of water vapor diffusion and contains a film protection agent with fungicidal properties to prevent mold formation. The paint is easy to work with, has good coverage and has a high diffusivity. The paint is particularly suitable for renovation coatings on mold-infested interior surfaces as well as for preventive repainting in rooms with insufficient ventilation, such as bathrooms and basements. Interior plaster, concrete, sand-lime brick, woodchip, paper and non-woven wallpaper are suitable as substrates Expansion panels made of plasterboard, hardboard, pressboard or hard foam.

Processing:

The surface must be dry, clean and stable. The mold or fungus infestation should first be completely removed. Pre-treat a highly absorbent or sandy surface with a deep primer. A primer can be applied diluted with up to 5% water. Then apply 1 - 2 top coats undiluted. The anti-mould paint can be tinted with up to 5% solid and tinting paint. Please note that you can only use this paint with a roller or brush and not spray it on.

Consumption:

approx. 6 m²/liter | Sufficient for approx. 15 m²

Attention/safety instructions:

Dangerous respiratory droplets can be formed when spraying. Do not inhale aerosol or mist. Harmful to aquatic organisms with long-term effects. May cause an allergic skin reaction.

Colour: white

Content: 2.5 liters (enough for approx. 15 m²)

Yield: approx. 6 m²/liter, for a coat on a smooth surface

Drying time: approx. 4 - 6 hours (depending on room temperature, humidity and absorbency of the surface)

Properties: high coverage, water vapor diffusible, long-term protection against mold, wet abrasion resistance class 2 according to DIN EN 13300, water-thinnable (max. 5%), tintable (with a maximum of 5% solid and tinting color)