Basic Cleaner Clean & Strip 750 ml by Dr. Schutz Final and Basic Cleaner

Name: Dr. Schutz Clean &amp; Strip 750 ml Building Cleaner
Brand: Dr. Schutz
SKU: 78016172
Price: 7.1 EUR
Availability: InStock

Clean & Strip is a basic and finishing cleaner from Dr. Schutz for all resilient floors. Thus it is suitable for linoleum, vinyl, PVC or CV floorings. However, it is also suitable for natural and artificial stone floors. The cleaning agent is mild and effective at the same time and removes removes coarse dirt, layers of care product residues and adhesive residues in equal measure during basic cleaning. Furthermore the agent is gentle on the material with a PH value of 9.5-10, low-odour as well as NTA- and phosphate-free.

Coarse dirt should be removed before use. Clean & Strip is only conditionally recommended for basic cleaning of sealed wooden floors.

Application Dr. Schutz Clean & Strip

Remove coarse dirt by vacuuming or sweeping and mask off adjacent surfaces. Pre-treat stubborn stains with a pad and the undiluted basic cleaner.

Final cleaning of the building:

After the coarse dirt has been removed, the diluted Clean & Strip can be spread on the surface. Allow to soak in for approx. 10 minutes. Work the surface thoroughly and slowly with a scrubbing brush or single-disc machine and a suitable pad. The cleaning solution should not dry on the floor. It is therefore recommended to work in sections. Then remove the cleaning liquor with a spray vacuum cleaner and hard floor adapter or a rubber squeegee with an absorbent wide mop. Finally, rinse with clean water.

Dilute the application concentration with water 1:5 to 1:10 for final cleaning.
Final cleaning of new rubber tiles or particularly stubborn residues to remove mould wax: undiluted up to 1:3.
Dilution can be increased accordingly for minor soiling

Basic cleaning:

Before basic cleaning, check the floor covering in an inconspicuous place for colour and material resistance. If necessary, wet the floor with clear water before treatment. After the coarse dirt has been removed, the diluted Clean & Strip can be spread over the surface. Allow to soak in for 15-20 minutes. Work the surface thoroughly and slowly with a scrubbing brush or single-disc machine and a suitable pad. The cleaning solution should not dry on the floor. It is therefore recommended to work in sections. Then remove the cleaning liquor with a spray vacuum cleaner and hard floor adapter or a rubber squeegee with an absorbent wide mop. Finally, rinse with clean water.

For household use, dilute in a ratio of 1:5.
In the contract sector, undiluted up to 1:3 (in this case, please depend on the resistance of the care film).

Note:

Do not wet sensitive surfaces such as wood, metal or painted surfaces uncontrollably with the cleaning liquor.
If necessary, dilute the cleaner more and allow it to act briefly several times.
Wear rubber gloves during application and ensure good ventilation of the rooms to be cleaned.
Acceleration of drying can be achieved by heating or working with blowers. Note the longer drying times for absorbent coverings (e.g. Lino) and in joint areas, especially for LVT.
Store in a cool, dry place in the original sealed container.
Store under lock and key and out of reach of children.
For basic cleaning of floating floor coverings or poorly bonded coverings, especially LVT, keep the supply of cleaning liquor and the exposure time low by using smaller cleaning sections. Uncontrolled migration behind the covering can result in unpredictable damage

Consumption:

Basic cleaning: 10 m²/l undiluted up to 50 m²/l at dilution 1:5, with an application of wiping liquor of 100 ml/m².

Final cleaning: 100 m²/l at a dilution of 1:10, with a wiping solution of 100 ml/m². Consumption may vary considerably depending on the situation.

Range:

At 0.75l 7.5 m² undiluted, up to 75 m² at dilution 1:10.
With 5l 50 m² undiluted, up to 500 m² with dilution 1:10
With 10l 100 m² undiluted, up to 1000 m² with dilution 1:10

Clean & Strip from Dr. Schutz (750 ml) - Universal or finishing cleaner for resilient floors such as linoleum, vinyl, PVC or CV floors.
Perfect cleaning with strong dissolving power - Removes coarse dirt, build-up of care product residues and adhesive residues, without addition of PTA or phosphate
Easy to use: remove coarse dirt, spread diluted Clean & Strip, leave to work for 10 minutes, work on the surface, absorb cleaning liquor, finish with clear water
Versatile use - not only suitable for resilient floors, but also for natural and artificial stone floors
Yield - up to 50 m²/litre at the usual mixing ratio of 1:5. The exact range depends on the dilution