Wilckens Granite Effect Paint Spray 400 ml in various colours
Wilckens decorative lacquer, for a deceptively genuine granite effect, is suitable for painting objects indoors and outdoors, such as wood, metal, glass, ceramics, porcelain, paper, cardboard, stone, paintable plastics and on polystyrene. A suitable primer is required for optimum adhesion of the paint to the substrate. For objects made of plastic, we recommend pre-treatment with plastic primer. Sand the object if necessary and remove sanding dust (wear a dust mask). The surface must be clean, dry and free of rust and grease. Please mask off surfaces not to be painted beforehand.
Danger/Caution: Extremely flammable aerosol. Container is under pressure: may burst when heated. If medical advice is required, have packaging or identification label ready. Keep out of the reach of children. Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke. Do not spray against naked flames or other sources of ignition. Do not stand or burn, even after use. Do not inhale aerosol. Protect from sunlight. Do not expose to temperatures above 50 C degrees. Dispose of the contents / container in accordance with local regulations. Formation of explosive mixtures possible without sufficient ventilation.
Safety data sheets can be found under Info-Download.
Wilckens Granite Effect Paint Spray. For a deceptively real granite effect
For painting objects indoors and outdoors
Water-based and no unpleasant smell
Yield: approx. 0.4 m²/400 ml content, depending on the condition / colour of the substrate
Drying time: (at 20°C, 50% relative humidity) dust-dry: after approx. 1 hour. Firm to the touch: after approx. 24 hours. Recoatable: after approx. 24 hours
Please note that the drying time depends on the ambient temperature, the air humidity and the applied layer thickness.