Wilckens colour paint spray silky gloss & high gloss on synthetic resin base in various colours 400 ml
Wilckens spray paint is a high-quality solvent-based alkyd resin paint. Suitable for painting and repairing objects indoors and outdoors with good covering and filling power. The product is colour and gloss resistant. It withstands weathering and UV rays and is also lightfast. The colour gradient of the varnish is very even and it shows excellent adhesion on almost all materials.
Danger/Caution: Extremely flammable aerosol. Container is under pressure: may burst when heated. Causes skin irritation. Causes severe eye irritation. May cause drowsiness and dizziness. Repeated exposure may cause brittle or cracked skin. If medical advice is required, have the container or label ready. Keep out of the reach of children. Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke. Do not spray against naked flames or other sources of ignition. Do not stand or burn, even after use. Do not inhale aerosol. Protect from sunlight. Do not expose to temperatures above 50 C degrees. Dispose of the contents / container in accordance with local regulations. Formation of explosive mixtures possible without sufficient ventilation. Contains: Acetone, hydrocarbons.
Lacquer spray in different colours, silk-gloss & high-gloss
High quality synthetic resin, quick-drying
for outdoor and indoor use, scratch-, shock- and impact-resistant, very good flow
Yield: approx. 2 m2 /400 ml depending on colour shade and hiding power Storage: (+ 10°C - 25°C, relative humidity max. 60%) 10 years when stored properly Store in a dry place. Protect from sunlight or other heat sources. Temperature resistant: up to 80°C Gloss level: at 60° measuring angle according to DIN 67530
Drying time: (at 20°C, 50% relative humidity) dust-dry: after approx. 30 minutes. Tack-free: after approx. 4 hours. Dry through: after approx. 24 hours. Recoatable: within 2 hours or only after 24 hours. Lower temperatures and higher air humidity and layer thickness extend the drying time!