Wilckens' primer is the perfect support for your renovation work. The German Brand product is available in 10 liters and optimally suited for priming highly absorbing woods which includes gypsum-lime plaster, cement and concrete surfaces. Furthermore, the product is low-emission.
Notice: This product should be stored in a safe place and out of the reach of children. Take all necessary safety-related measures to ensure a safe use.
Paint structure and application technology:
The substrate must be clean, dry, grease-free, even, load-bearing, absorbent and adhesive. Loose paint and plaster parts must be removed before painting. Damaged areas must be filled with filler. Thoroughly wash off glue/lime paints and chalking surfaces. Cover surfaces not to be primed well, as dried splashes are difficult to remove. Wipe off unintentional splashes immediately with a damp cloth. Stir well before use. Air, object and material temperature: at least + 5 °C. Test application recommended.
Apply evenly in one go, full and undiluted. Highly absorbent substrates should be primed twice wet-on-wet (i.e. apply 2 coats without drying times), then painted over. The primer must not form a closed film (it must not remain blank on the surface).
The primer can be applied by painting, rolling or spraying (also airless). When spraying, care should be taken to ensure that the spraying is carried out from bottom to top in order to avoid unevenly saturated partial surfaces caused by rotor formation. These runners only become visible after being painted with dispersion paint and mark themselves as grooves.