Painter's fleece adhesive - Ready-to-use and solvent-free dispersion adhesive from Herbol
The solvent-free dispersion adhesive from Herbol for cellulose and glass fleeces is ready for use and can therefore be used without time-consuming mixing. The painter's fleece adhesive can be applied undiluted with a roller, airless device or paste machine. After a drying time of 8-10 hours, the adhesive can be worked over. After drying, the dispersion adhesive is transparent. The adhesive is suitable for structural fleeces and paintable fleeces indoors on new and old load-bearing substrates such as plaster, gypsum plaster or concrete. Depending on the type of fleece, the consumption is approx. 150-250 g/m² as an adhesive application. The container size is 16 kg. The adhesive can be stored unopened in the original container for approx. 1/2 year.
The substrate must be clean, sound, dry, load-bearing and free from fungal attack, efflorescence and separating agents, as well as free from soiling such as soot and chalking constituents. Holes, damage or missing areas should be repaired with suitable filler/filler. The adhesive can be applied directly to the wall with a roller, paste or airless applicator. Then apply the fleece to the wall and press it down, then smooth it out. Then allow to dry for approx. 8-10 hours. Clean the tools used thoroughly with water immediately after use.
Approx. 150-250 g/m² | Sufficient for approx. 64-107 m² wall surface
Ready-to-use & solvent-free dispersion adhesive for cellulose and smooth nonwovens
Suitable for structural nonwovens and paintable nonwovens indoors on new and old load-bearing substrates
Can be applied undiluted with roller, airless device or paste applicator
Fast and smooth application with optimum adhesive distribution